EPS400 Foiled Panels
EPS400 Foiled Panels
£22.50£27.00 Ex. VATInc. VAT
Our Rapid Response underfloor heating EPS400 overlay boards are lightweight, super strong, easy to fit, and designed to be laid over any existing or new floor. The aluminium covering provides optimum system performance and is perfect for both commercial and residential use.
Features:
- Lightweight, super strong EPS400 overlay boards.
- Suitable for use under laminate, engineered wood, carpet, vinyl, and tiles.
- Can be laid over any existing or new floor.
- Perfect for both commercial & residential use
- Minimal height increases of just 20mm or 16mm.
- High compressive strength of 400KPA
- Each panel measures 1200x600x20mm or 1200x600x16mm
- Takes 16mm or 12mm pipe at 150mm pipe spacings.
- Pre-formed with straight runs, return loops, and cross runs at one end.
- Covered with a layer of aluminium, spreading heat quickly & evenly across the surface to maximize the output and efficiency of the system.
- Perfect choice for retrofit installations.
Installation:
The panels are laid directly onto the existing concrete, floorboards, or solid flooring.
Fix securely using Rapid Response Spray Adhesive or Mapei eco 380.
Adhesive Consumption Rate:
Wood/tiled subfloor – 5sqm/can: Spray only the subfloor then lay the board onto the glue.
Concrete/porous subfloor – 2.5sqm/can: Spray the subfloor AND the underside of the board so you are putting glue to glue.
Flooring Advice:
Laminate/Engineered Wood:
Lay flooring directly onto the EPS floor panel as a floating floor.
If no underlay is pre-bonded to the underside of the planks, use our 3mm breathable underlay before laying the floorboards.
Do not exceed 20mm board depth!
Carpet/Vinyl:
We recommend firstly covering the whole floor area with T&G chipboard or two thinner layers 6mm ply glued to each other and left as a floating floor.
We do not recommend screeding on the foil panels.
Carpet & underlay combined should not exceed 2.5tog.
Tile/Stone:
We recommend using our Cem boards for tiling/stone flooring . There are companies out there that will say tiling onto foil panels are ok but long term there
Are too many risk variables at play.
Maximum Pipe Length:
20mm panel = 100m
Installation Video
Theoheat
Enquiry Form